What is a Trampoline Competition?
A trampoline competition is a gymnastic sport performed while bouncing on a trampoline. Competitors use acrobatic moves to gain points from judges in official competition. Moves are performed after bouncing on the trampoline at a height of about 25 ft (about 7.5 m). Trampolining requires athletic strength and body control and has been an Olympic sport since 2000.
A trampoline competition involves backward and forward somersaults, twists, rotations, and a variety of other moves. Take-offs and landings can be performed from the feet, the front of the body, or the back side of the body. Moves in a trampoline competition are performed with many different bodily moves, and involve most body parts.
There are three basic moves in a trampoline competition. A straight move is performed with the entire body straight — legs and neck straight and arms down to the sides. A piked move is performed with the legs and arms both straight out at 90 degree angles to the body — the arms and legs in this move sometimes touch at the hands and feet. A tucked move is performed with the legs and arms both bent—the knees are pulled into the chest and the arms are folded around the legs. This move is comparable to a “cannonball” dive into a pool. These moves are performed with rotations and somersaults of the body at different angles and different degrees of difficulty.
A trampoline competition must be started on the feet and ended on the feet, and 10 touches of the surface of the trampoline are completed in between. Competitions are performed on regulation sized trampolines, and are judged out of three routines. Scores are given in a trampoline competition on a 10 point scale, based on completion of moves, degree of difficulty, and body form. Degree of difficulty is determined by turns added onto the three trampolining moves. One half turn added onto a tuck, for instance, adds one half point. One full somersault, then, would add one full degree of difficulty point.
The trampoline competition was made a popular sport by NCAA gymnastics champion George Nissen. The trampoline sport was invented in 1937. It first became popular in high schools and colleges in the United States. It then moved to Europe and the first World Championship was held in 1964. The sport of trampoline competition became popular internationally in the 1970s and 1980s and began to be dominated in tournaments by Europeans countries and especially countries of the former Soviet Union.
The Premiere Builder of Tents & Canopies with Graphics
WHY CHOOSE PROMOTIONAL DESIGN GROUP
As Your supplier of Tents and Canopies with Graphics
Tents And Canopies Manufacturing Experience: Since 1984 Promotional Design Group has emerged as the premiere builder of Tents & Canopies as well as Tents and Canopies with graphics in the Canopy and Tent Industry. We have successfully designed hundreds of thousands of custom tents and canopies with graphics for many clients worldwide. Our state of the art Digital Printers, Automated Vinyl Cutters, R F welding machines and Silk Screening Equipment combined with an eclectic staff of skilled craftsmen with over 50 years of combined experience, has given us the edge over all our tent and canopy competition thus allowing us to produce superior quality tents and canopies as well as tents and canopies with graphics that are unmatched. We have been in the forefront of cutting edge technology and continue to forge ahead as the leader in the Tent and Canopy Industry.
Tents And Canopies Are Manufactured In The USA-All tents and canopies are manufactured in our South El Monte California manufacturing facility here in the United States of America. All Tents and Canopy materials are purchased and manufactured in the USA (Wooster Ohio). All Ropes and Fasteners that are used on our Tents and Canopies are also manufactured in the USA.
Three Year Warranty On Tents and Canopies- PDG is always striving to find and offer the best materials for the development and construction of our Tents and Canopies as well as Tents with Graphics. Our conviction to excellence has given us the latitude to offer a Three Year Warranty (on All Tents and Canopies as well as our Tents and Canopies with Graphics) that is unparalleled, a testament to our confidence in our quality and longevity. Competition Standard Tent And Canopy Warranty-One year limited warranty.
Tent And Canopy Tops- The materials offered for tent and canopy tops are superior to any offered in the Tents And Canopy industry. We prefer to provide a material that will substantially benefit the end user, even though we pay a much higher price for our tents and canopy fabrics. Remember higher-grade fabrics equal longer life.
Tents And Canopies Frame Work- Two Inch anodized aluminum tubing is used on all Tent and Canopy Frames. Two Inch anodized aluminum tubing provides a much more durable and sturdy tent and canopy frame that can resists high winds without bending easily. Most Tents and Canopy Manufacturers and Suppliers typically provide one inch aluminum poles for 10’ by 10’ and 20’ by 20’ wide tents and canopies.
Tents And Canopies (Anodized Aluminum) Frame: There are many advantages in having an aluminum tent or canopy frame it is light in weight and will never rust. Also all our Aluminum tents and canopy frames are Anodized to prevent any staining on the inside of the tent top which is a common occurrence with standard aluminum Tents and Canopy frames that are not anodized. A black stain is usually present on the inside of the tent top usually in all areas the tent frame is in contact with. Trying to remove the stains from inside the tent or canopy are virtually impossible
Tent And Canopy Fittings- All tents and canopy fittings are zinc plated to prevent rust and corrosion. All Tents and Canopy Fittings are also designed to facilitate the installation.
Tent And Canopy Top & Tent and Canopy Fittings Carrying Bags- 3 Carrying bags are provide for Tents and Canopy Tops, Tent and Canopy Fittings and for Tent and Canopy Fastener Pins.
Water Proof On All Tents And Canopies- All our Tents and Canopies and Tents and Canopies with graphics are heat sealed to prevent water permeation. Heat Sealing is the best method for preventing any leaks and thread rot from occurring on all tents and canopy tops.
Aqueous Protective Coating On All Tents And Canopies With Graphics: An aqueous protective coating is applied using a laminator to all digitally printed tent and canopy tops, sidewalls and short skirts. There are two advantages in using an aqueous protective coating for our tents and canopies with graphics the first being for additional U.V protection and the second for creating a more durable and protective barrier against scuffing. PDG is the only tent and canopy company in the United States, which uses a protective coating on all digitally printed tents and canopies , sidewalls and short skirts at no additional cost to the customer.
Competition-No Protective Coating Applied on Tents or Canopies.
No Charge On Tents Or Canopies With Graphics Rendering: PDG does not charge for creating a rendering of your tents or canopies or tents or canopies with your graphics or logos.
Fast Turnaround On Tents Or Canopies With Graphics or Logos Renderings: Once artwork is submitted by customer, on average it takes between 2 to 4 hours to complete your tent or canopy or tents or canopies with graphics rendering. We have 9 graphic artists solely dedicated to creating layouts of tents and canopies and tents and canopies with graphics 40 hours a week.
Competition Turnaround on Tent or Canopy and Tents or Canopies with Graphics Or Logos Rendering: 24 to 72 hours turnaround.
State Of The Art Equipment: PDG is continuously looking to stay in front of the pack and always looking for the latest and greatest in cutting edge technology from digital printers to automated cutting tables for precise measurements on all our tents and canopies.
Tents and Canopies are tailored to exact client specifications utilizing their logo or text design. From concept to completion, Promotional Design Group will undoubtedly meet your design needs or challenge new horizons and custom design a signature style tent or canopy just for you. Your investment is very important and making the right choice or decision when purchasing your tent or canopy or tents or canopies with graphics will bring you everlasting value.
Your tent or canopy or your customized tents or canopies with graphics will produce a spectacular and visually stunning impression wherever displayed.
PDG is a firm believer that quality, durability and superior products will outlast inferior and less expensive tents and canopies by a wide margin. So don’t look at price as being the determining factor, look at the overall value of your tent or canopy. Remember longer lasting Tents and Canopies will be a good return on your investment.
Each of our jumping castles is designed similarly to their larger and more expensive commercial cousins requiring a continuous air flow blower to ensure that they remain inflated. All of our bouncers, even the cheapest, include an electric blower with them in the box..
There are some home use jumping castles out there that are designed to remain inflated and therefore do not require a continuous air flow blower. You should be aware that this design is more prone to damage and deflation because the jumping castle has a perfect seal of air meaning that air has nowhere to escape when you've got several children bouncing on them at once.
The Happy Hop jumping castles are designed to continually "leak" air so that they have plenty of give for when children bounce. This doesn't mean that the castle deflates because it is contantly having hundreds of litres of air pumped into it, replacing immediately the air that is displaced as children bounce. The advantage with this design is that even if your jumping castle gets small holes in it, this will have virtually no effect on the operation of the bouncer.